 |
DOUBLE COUPLER (DROP FORGED)
A one-piece load bearing coupler used for connecting two scaffold tubes at right angles.
|
 |
SWIVEL COUPLER (DROP FORGED)
A one-piece load bearing coupler for connecting two scaffold tubes at any angle.
|
 |
DOUBLE COUPLER (PRESSED STEEL)
A one-piece load bearing coupler for connecting two scaffold tubes at any angle.
|
 |
SWIVEL COUPLER (PRESSED STEEL)
A one-piece load bearing coupler for connecting two scaffold tubes at any angle.
|
 |
PUTLOG COUPLER (PRESSED STEEL)
A one-piece load bearing coupler for connecting two scaffold tubes at any angle.
|
 |
ADJUSTABLE BASE
Adjustable base or Head Plate gives adjustment between 45 mm to 225 mm. |
 |
FIXED FINIAL
Connects a scaffold tube at right angles directly to the end of another tube with no projection. ideal for guardrails, crowd control barriers etc. |
 |
SLEEVE COUPLER
An external connection for joining two scaffold tubes end-t-end. It has a central, circular division place so that equal lengths of each tube can be inserted and separately secured. Suitable for joints where tension will be developed in the tubes.
|
 |
BASE PLATE
A 150mm x 150mm steel plate providing a 0.023m2 flat bearing surface for load distribution from standards. It has a 50mm high intefral spigot and two fixing hole for use with sole plates. |
 |
JOINT PIN
Used to connect two scaffold tubes end-to-end. Fitted internally it expands to apply maximum grip against the wall of the tube. Not suitable for joints where tension can be developed in the tubes. |
